Elara Sapphire Blue CZ Designer Bracelet

Name: Elara Sapphire Blue CZ Designer Bracelet | Mirana
SKU: MJBR21R485
Price: 1500.0 INR
Availability: InStock

₹1,500.0

Size Guide

Bangle Size Guide

Unsure of what bangle size will fit your hands. Below is the helpful guide for you to determine the bangle size that you need. The guide has two options for you to help with the decision or you can use both to double check your results. If you need further help or customized size, feel free to contact us.

Option-1

Measure with Your Own Good Fitting Bangles

Requirements - Ruler & Bangle

Take out any bangles that you already have & is a good fit on your hand/wrist.
Measure the inside diameter and compare to the below table
As long as you measure the inside diameter & not outer diameter of your current bangles this chart will provide an accurate way to find your bangle size.

Bangle Size (Indian)	Inside Diameter
	inches	mm
2-2	2.125	54
2-4	2.25	57.2
2-6	2.375	60.3
2-8	2.5	63.5
2-10	2.625	66.7

Option-2

Measure your hand using thread or paper strip

Requirements - Flexible tape measure or a piece of string/paper strip and a ruler.

Keep your thumb and little finger together & make your hand as small as possible, as if you are putting on the bangles.
Using the tape measure (or string/strip), measure your hand at the widest point (as shown in picture). The tape measure/string/strip should be pulled tight, not loose.
Make note of the actual circumference of your hand by marking on the tape/string/strip where it meets the other end. Measure the length with the ruler to get your hand circumference.
Compare the measurement to the bangle circumference in below table. While selecting the size compare to the upper size for comfortable fit. For example, if your hand circumference is 183mm then go with 2.6 size (circumference 189.5mm) for comfortable wear.

Bangle Size (Indian)	Hand Circumference
	inches	mm
2-2	6.67	169.4
2-4	7.06	179.6
2-6	7.46	189.5
2-8	7.85	199.4
2-10	8.24	209.3

In stock

SKU: MJBR21R485 Category: Bracelets Tags: American Diamond, Bracelet, CZ, Designer, Fashionable, Gift, Latest Artificial Jewellery, Latest Designer Jewellery, Latest Imitation Jewellery, Latest Jewellery, Latest Trendy Jewellery, Party Look, Party wear, Pearl, Pretty, Sapphire Blue Colour Stone

Details

Base Material: Copper based Alloy
Plating: White / Rhodium
Stone: CZ, Imitation Stones
Finish: Embellished

In the Box: Bracelet

Size And Fit

Bracelet

Weight: 26 g
Length: 5.6 cm
Width: 1.6 cm

Lock Type: Yes
Bracelet Size : 2.4

Note–

Actual product colors might vary a bit from what it appears in the photographs due to light conditions used during photography.
We have taken precautions for the provided dimensions, but these should still be considered as an approximate. Actual dimensions may vary slightly.

Weight	26 g
Dimensions	5.6 × 1.6 × 0.3 cm
Color	Sapphire Blue
Jewellery Look	Contemporary
Jewellery Occasion	Party
Jewellery Type	Diamond / CZ
Product Type	Bracelet

Reviews

There are no reviews yet.

Be the first to review “Elara Sapphire Blue CZ Designer Bracelet” Cancel reply

You must be logged in to post a review.

Avoid contact with Water: Water is known to affect the appearance of metal, stones, crystals and pearls. It can wear plating and cause discolouration. Protect your jewels by removing rings to wash your hands and never wear any costume jewellery when you shower or swim. Have in mind, costume jewellery plating is usually thin and can eventually wear off, so be careful!

Avoid contact with Harsh Chemicals: Through our daily grooming rituals, we are frequently exposed to various chemicals which may not harm us, but could be harmful to our jewellery. Never allow your fashion jewellery to come in contact with harsh chemicals, oils, nor spray perfumes directly on them. This will cause the jewellery to fade, discolour, or even ruin them completely. We recommend you to always put on your perfume and cosmetics such as body lotion and ensure your skin is thoroughly dry to the touch, before putting on your costume jewellery.

Keep It Safe: Costume jewellery items should be carefully stored in their individual boxes to avoid scratching, damage and to keep away from direct sunlight. Do not keep the costume/fashion jewellery in the velvet box/cloth. Please use the cover provided to keep the jewellery after use. Plating may turn black due to use of velvet cloth. Please note that the Rose Gold plating is usually more sensitive to moisture (prolonged exposure in open air) & may tarnish easily if not stored properly.

Keep it sparkling : To keep crystals sparkling, simply wipe very gently with a slightly damp cloth. You should rarely need to do this if you follow all other steps. Do not use soap/water or jewellery cleaner to clean your costume jewellery; it may ruin its plating.

Give it Rest: Fashion Jewellery is best worn for occasions – If you are the “I never take it off & wear it every day” type of person - your jewellery will not last as long as someone who wears their jewellery every now & again. We would also personally advise you not to wear "fashion" jewellery on a day to day basis, but rather for "special occasions" - that way you'll enjoy them for much longer!

Fashion jewellery is not meant to last forever, but why not try to make it last, as long as you can with these tips.